4.5" Heavy Duty Raised Toilet Seat with Arms and Legs, 600 lb capacity
Supports Users up to 600 lbs!
This elevated toilet seat locks onto your toilet raising the height by 4.5" with adjustable floor legs for added stability. Ideal for bariatric users.
Features:
Adds an additional 4.5" to current bowl height
Soft foam armrests for comfort and balance support when assistance is needed in sitting down on or rising up from the seat.
Secures in place with a worm-screw lock in the front
Includes (4) four adjustable floor legs for additional safety and stability.
Ideal for people who need extra assistance because of significant lower extremity weakness or poor balance.
Ideal for bariatric or overweight users.
Designed to fit most basic model Standard Size or Elongated Size Toilets.
Supports users up to 600 lbs.
Installation Instructions:
1. Place each of the armrests in the provided slots until the push buttons click into position. Push buttons are engaged when they fully protrude through the holes in the bracket and an audible click is heard.
2. Ensure that both legs are adjusted to equal height and that push buttons are fully engaged before using. This ensures an even height adjustment and that the adjustable legs are securely locked in position. Test for stability before each use.
3. Raise the toilet lid and seat ring, exposing toilet bowl. Certain bowl styles may require the removal of the existing seat and/or lid to ensure a correct fit.
4. Turn locking device (located on front of locking raised toilet seat) counterclockwise until there is enough space to clear the inner rim of toilet.
5. Place the raised toilet seat onto the toilet bowl rim by hooking rear flanges under the edge of the bowl. Ensure that the raised toilet seat sits flat on the toilet bowl rim, with the adjustment knob at the front of the toilet bowl.
6. Center the raised toilet seat on the bowl, then push the unit back as far as possible.
7. Tighten the adjustment knob by turning it clockwise. Once resistance is felt, turn knob an additional 1/8 inch until snug.
8. If the rear portion of the raised toilet seat is touching the toilet seat or lid, remove the toilet seat and lid and repeat steps 5-7. The raised toilet seat is installed properly and ready for use when the unit sits flat on the toilet bowl lip and fits securely against the inner rim of the bowl.
Note: Not all toilet bowls are compatible with the raised toilet seat with lock, which will prevent its proper use and may cause damage to the product. If the toilet bowl has a raised top or inner ring, or has protruding points or sections, the raised toilet seat with lock should not be used.
|